The nail rod of the coil handles the light rod, thread, ring, etc., the light rod is easy to disassemble, the thread is suitable for the connection of hardwood, and the ring is suitable for the connection of cork.
1. The surface treatment of coil nails is divided into dipped paint, galvanized, plated color zinc, dacroc, etc., generally only dipped paint, dipped paint uniformity has a direct impact on the effect of lubrication, fastening, rust prevention.
2. The nail head of the rolling nail has a sharp head, blunt head, chisel point, blunt chisel, etc., according to the hardness and toughness of the material to decide, generally only use the sharp head in China. Most roll nail users mistakenly believe that the more sharp the nail, the better, this idea is wrong, any nail has its special occasions of use, should be determined according to the specific situation, which has a certain relationship with the nail gun, materials;
3. The matching between the nail gun and the nail coil is better. The design of the nail gun has certain requirements on the Angle and distance of the nail coil, and the compatibility of large nails is good.
4. The welding wire of the coil nail is very important. The hardness and toughness of the welding wire are just right, the appearance of the solder joint is clean, and the welding wire is easy to be deformed and broken in use, causing the clamping nail.
5. Choose nails carefully. Nails with non-standard spot welding spacing will seriously affect the life and working efficiency of the nail gun. In addition, must pay attention to purchase the trap, in order to reduce cost, a lot of nail manufacturers to cut corners, wire diameter do fine, nails short, finally the latter was consumer, buying the nail, must use vernier caliper, said to, according to the size of the nail, weight and the label on the outer packing should be consistent, otherwise the cheaper than buy a smaller size of nails. Galvanized wire in the transportation process to pay attention to matters
When it comes to galvanized wire, we should not be unfamiliar with it. It is a kind of galvanized metal wire. It is used in the construction industry, agricultural protection, goods packaging and other aspects. However, because of the high elasticity of galvanized wire, it can easily be dangerous if not taken care of during transportation. So galvanized wire in the transportation should pay attention to what points?
1. It must not be tiled or overlapped, nor must it be subject to collision, compression, or any mechanical damage.
2. Protect against exposure to moisture and prolonged exposure to sunlight.
3. Cable grooves with galvanized wire must not be moved over long distances.
4. In the process of loading and unloading, galvanized wire should use lifting machinery or special platform.
Translation software translation, if there is any error please forgive.
Post time: 15-06-21