The production of electric welding net is mainly welding, whether the welding point is firm directly determines the quality of the net. Purchase when you need to carefully observe the product, if the welding mesh solder spot is too shallow, it shows that the welding is not so strong, jerky in the production process, it is easy to open welding after use. If the welding net solder joint is too deep, although the welding is more solid, but the bearing capacity of the solder joint is greatly reduced, once the pressure exceeds the load range will fracture at the solder joint, the use of such products as the welding net is more dangerous.
The welding net is made of high quality wire row welding, and then cold plating (electroplating), hot plating, PVC plastic and other surface passivation, plasticizing treatment, the characteristics of the welding net: smooth surface, uniform mesh, welding spot firm, local machining performance is good, stable, anticorrosive, anticorrosive good etc.
Production process of wire welding net:
To draw wire welding net is to change the original cold galvanized wire welding net wire after drawing, in direct welding, that is, first galvanized after welding. The structure of zinc layer and iron wire is firm, no dezincification, strong anticorrosion performance, silk soft toughness is good.
Characteristics of wire welding net:
Its characteristics are: net surface smooth, uniform mesh, welding spot firm, visual brightness more than one, local machining performance is good, stable, anticorrosion, corrosion resistance; More acid resistance, alkali resistance, aesthetic and so on. It is also very versatile.
Post time: 13-04-22