The wire used for wire mesh is made of low carbon steel wire, medium carbon steel wire, high carbon steel wire, stainless steel wire and other materials may be woven or welded. Production process: general braiding, embossing braiding and spot welding type. If the steel wire as the material, after the equipment processing into a network, so called wire mesh.
The national standard on the use of wire mesh standards have certain requirements, the diameter and mesh size match the use, rather than simply the diameter of the size, the use of plastering layer is that the grid should not be greater than 20×20, the diameter is not easy to be less than 1mm, the diameter of the light is not much significance, select 40×40×0.9 and select 10×10×0.6 wire mesh, Which is better? I’m afraid it’s 10×10×0.6.
And the role of wire mesh in the outer wall plastering is a method of anti falling from the Angle of sailing, the role of anti cracking is relatively small, because of the problem of orientation; And about the external thermal insulation system is used in the face of the brick, as for the role should also be anti fall and then anti cracking, so that the grid should be selected 10×10×0.6, these are some experience selection, the conversion of the grid from the national standard of wire mesh, the selection of steel content grade conversion.
The policy of wire mesh has mesh size, wire, square meters of steel, galvanized quantity, etc., to consider the corrosion resistance of wire mesh and the safety of the system! Galvanized wire mesh is more fierce than wire diameter, galvanized quantity is very important, must be hot plating, welding after plating is better than plating after welding, as for wire diameter, induction to consider the site construction and meet the needs of safety.
Post time: 04-08-21