Electro-welding galvanized mesh is made of high quality low carbon steel wire, which is welded by precision automatic machinery process. The net surface is smooth, the structure is strong and the integrity is strong. Even if the local cutting or local pressure is not loose, the galvanized wire mesh is divided into welding galvanized wire mesh and welding galvanized wire mesh galvanized (hot plating) after the welding galvanized wire mesh also has good corrosion resistance. Thermal welding galvanized mesh has good toughness, thick coating, corrosion resistance, corrosion resistance, strong coating and so on. Cold welding galvanized mesh economical and practical, white color.
The width of the galvanized wire mesh should not be less than 200mm, the lap width of the matrix should not be less than 100mm, the galvanized wire mesh should be welded, the mesh size is not more than 20mm*20mm, the diameter of the steel wire is not less than 1.0mm. Mesh size should not be greater than 8mm*8mm, the unit area is large. The dosage is more than 120g/㎡
You can stick at the bottom of the bottom, directly use the compacted bottom ash, the disadvantage is to strengthen the site management, otherwise the operator will steal the material, or the position is not correct, the shortcomings of the galvanized wire mesh must be fixed with the thermal insulation nail. Second, strong elasticity, not easy to stick to the wall. The surface of this painting will have a wire rope head, which will affect the appearance of the wall after a long period of rust. Usually use electric welding galvanized mesh 0.9*12.7*12.7 or 9.5.
According to P137.0.1 of DB33/T1022-2005, there is a corner described as a wall that shall be protected by a 25*25 hot dip galvanizing mesh. According to the standard of galvanized welded mesh, the mesh size of 25*25 mesh is 1.8-2.5. In the corner of the construction is difficult, the whole wall is covered with galvanized wire mesh roughness is difficult to control.
Post time: 25-05-21