Decorative hook mesh selection of stainless steel, aluminum alloy, brass, copper and other alloy materials, by special process woven hook mesh. It is to do a good screen decoration, today we introduce the aperture and diameter of decorative hook mesh.
Title: Hook fence is a variety of fence. The diameter of the opposite side of each grid is generally 6.5cm-14cm. The thickness of the wire used is generally from 3.5mm to 6mm. Wire material is generally Q235 low carbon wire. Wire through ginning flower welding and decorative hook mesh black. The overall size of the mesh is generally 1.5 meters X4 meters, 2 meters X4 meters, 2 meters X3 meters. General surface treatment for cold (electric) galvanizing treatment. There are also hot dip galvanizing, dipping, spraying. But overall, 99 percent are cold (electric) galvanizing.
The smaller the mesh of decorative hook mesh, the finer the silk, the larger the mesh, the thicker the silk. For example, if the mesh aperture is 6.5cm, the iron diameter should be 3.5mm-4mm. If it is any thinner, it will be broken. If it is any thicker, it will be too heavy for workers to bear.
Decorative hook net size width generally does not span 2 meters. The length generally does not span 4m. The span of 2 meters is difficult for workers, and the second is that galvanized plating is not good. It can also reach six meters in length, but does not span six meters. Generally across 4 meters after the price will be significantly higher.
Decorative hook mesh solder joint welding, generally more robust, but assuming that the worker is a novice, the skill of the machine is not high, will present the situation of open solder joint. Once this situation appears, it will bring heavy losses to customers and factories.
Post time: 09-11-21