Now large volume galvanized wire in our life use more and more, to galvanized wire products to bring a great market, galvanized wire products are more and more kinds. The surface coating of good quality galvanized wire is continuous and smooth. When the plating parts are installed and combined, there can be no flow hanging, slag or dripping, and no defects such as dew iron on the surface. Good quality galvanized wire, coating must be uniform, roughly evenly soaked in copper sulfate solution for five times without dew iron. And with hammer knock test does not bulge, do not fall off. This is a good galvanized wire should have characteristics.
Galvanizing process of galvanized wire products is a very effective metal anticorrosion method, and it is also widely used in other industrial fields. After galvanizing, iron wire is commonly used in metal structure equipment of various industries. Due to the influence of production process or other factors, the zinc layer of galvanized wire products will be different to a certain extent, especially ordinary galvanized can not reach the beauty of electric galvanized, ordinary galvanized wire zinc layer is mainly for anticorrosion and corrosion prevention.
Specific galvanized wire production safety requirements: clean galvanized wire production environment, all hindering production tools and other items. Operators in pickling process, pay attention to the action should be careful, not careless, into the pickling cylinder must be handled gently, to prevent splashing on the body. When adding acid, the acid must be slowly poured into the water. It is forbidden to pour the water into the acid to prevent the acid from splashing out and wounding people, so as not to hurt yourself and others.
It is important to note that employees must wear protective equipment at work, wear a full set of protective clothing when necessary, and prohibit direct contact with acid and alkali liquid by human skin. Galvanized wire tray to be handled gently, inventory stacking to be firm, tidy, stacking height shall not be 5 plates high. The outer packing of galvanized wire products with outer packing requirements should be strict, so as to reduce the wear and loss of products in the process of transportation.
Post time: 29-03-22