Now the pet cage on the market is still mainly wire cage, so the identification of wire cage mainly has the following parameters:
1) wire thickness: we also know that the pet cage wire is too thin to be easily bitten off by dogs, the general cage wire on the market are 3mm steel wire, such wire is only suitable for small dogs or rabbits, for large dog friends I suggest to buy more than 4mm thick.
2) wire spacing: we all know that the smaller the wire spacing, the stronger the cage, in fact, too close is not good, too close to the dog will have a feeling of repression, we recommend that you buy wire spacing between 15-25mm, so it is not too close, and not too loose.
3) wire surface coating: some businesses say their pet cage with what stainless steel, in fact, we also know that the price of stainless steel will not be very cheap, most of the cage surface coating is a layer of anti-rust coating, the material is mainly PE powder, but some color is different. The cage of good quality will be cleaned before coated with PE powder, and then baked at a high temperature of 200 degrees, so that PE powder can stick firmly on the wire.
4) Steel wire welding process: sometimes when you buy a pet cage, it will crack in a few days. When you buy it, you can also look at whether the welding is smooth and whether the welding area is large. Generally speaking, the welding surface is large, it must be much stronger. There is also a very important welding point treatment, the quality of the cage, the welding surface must be smooth, will not damage the pet, but the quality is not good, it is easy to ignore these details, a small thorn, may let your dog injury.
Post time: 14-03-22