According to galvanized iron wire manufacturer, galvanized iron wire is the selection of excellent low carbon steel, through drawing forming, pickling rust removal, high temperature annealing, hot dip galvanized, cooling and other processes. Galvanized iron wire in the use process should pay attention to the following points:
① The diameter of galvanized iron wire for pulling shall not be 4mm small, and the diameter of galvanized iron wire for binding shall not be less than 2.6mm.
(2) Electric galvanized shaft wire direct selling shall not be used as waist hoop pressure reinforcement, usually not used as a whole binding.
The galvanized iron wire shall not be damaged when the wringing is tight.
④ Stop using more than two strands of galvanized iron wire one-time around the operation method.
Electric galvanized shaft wire direct selling is in the electroplating tank through the current unidirectional zinc plating on the metal surface, the production speed is slow, the coating is uniform, the thickness is thin, usually only 3-15 micron, bright appearance, poor corrosion resistance, generally a few months will rust. Relative hot dip galvanizing, electric galvanizing production cost is lower. Cold galvanized and hot galvanized difference: cold galvanized and hot galvanized difference is the amount of zinc is different, you can identify them from the color, cold galvanized color shiny silver with yellow. Hot dip galvanized shiny white.
Post time: 25-01-22