Cold drawn wire is a material produced after metal is worked. Its material is often called wire, which may not be known to everyone. In fact, metal wire is also a steel bar we often see in our daily life. Cold-drawn steel wire is a product made through a series of processes (such as stripping the shell). When it comes to iron wire, we will not feel strange. The processing technology is to force the diameter of the round steel through the hole smaller than its diameter, so that the length will become longer, but the diameter will become smaller, so that the process is repeated, the round steel will become smaller bit by bit, and the hardness will gradually become hard.
The following points must be kept in mind when making cold drawing:
1. Please check and confirm the operation of the equipment before production.
2. When pickling, it is necessary to slowly enter the cylinder to avoid the splash of liquid on the body.
3, in the production process, to do a good job of protection, in order to prevent the occurrence of danger.
4. Please ensure safe operation when receiving the wire, and put the wire reels gently. No matter what kind of auxiliary materials are used, they must meet the qualified standards of our country.
The main purpose of cold drawing is in the building materials, due to the use and function of the different, the test standards are different. Although it looks extremely soft, it is actually very strong, but can be used in a variety of ways. Prestressed tendons are commonly used. Usually, no plasticity is required, only strength, and this type of steel can be used.
Production of cold drawing process is not as complex as imagined, there are a lot of manufacturers in our country. It is very complicated to produce high quality just because of the difference in quality. So, my company is a professional production of all kinds of galvanized iron wire, nails, cement nails, black wire, etc., is a collection of design, production, processing, management as one of the modern enterprises, sincerely welcome friends who need to come to my factory to buy.
Post time: 19-05-21