The construction mesh will separate the road vertically on the section, which has a good effect of beautiful and anti-resistance, and the construction mesh is useful and convenient for transportation and installation. At the time of installation, the wire factory can adjust the connection position of the column up and down according to the relief of the terrain. Mesh selection of ultra-thick wire diameter and ultra-dense mesh, so as to avoid cutting and climbing, construction mesh corrosion resistance is very strong, construction mesh life is very long.
It can be said that it is beautiful and useful high-rise construction in satisfying the requirements of living at the same time, alleviating the dilemma of building less land. In the construction of high-rise construction projects, the leading role of stability is the mixed use of steel mesh in concrete, and the emergence of steel fiber concrete satisfies the requirements of construction designers and residents. Simple concrete and brick walls, if the foundation is not good, it is very simple to cause wall cracks, out-of-shape conditions appear.
Construction steel mesh is a kind of protective equipment that is used outside all year round. Assuming that the shortcomings of anti-corrosion can not be solved, the service life will be greatly reduced. So you need to protect the wire mesh. Assuming that wet hot dip galvanizing is selected, the solvent on the surface of the mesh will enter the zinc solution covered with molten solvent without monotonic (i.e. the surface is still wet) for hot dip galvanizing.
The disadvantage of this method is that it can only be galvanized in a lead-free state, and the alloy layer of the coating is very thick and has very poor adhesion. Perhaps the zinc slag accumulates at the interface of the zinc and lead solution and cannot be deposited at the bottom of the pot, because the proportion of zinc slag is greater than zinc and less than lead, so the barrier net pollutes the surface through the zinc layer.
Post time: 09-04-24