(1) Application methods: (1) Should reasonably select the goods on the pull direction. When used to avoid horizontal movement of goods, the pull direction should be as low as possible; Used to avoid overturning goods, the pull direction can be appropriately high. ② The use of galvanized iron wire [1] pull reinforcement methods are mainly: figure eight, inverted figure eight, cross, and shape or reverse and shape, etc. All kinds of pulling methods can be used alone, or two or more than two kinds of combination. The tension should be symmetric. (3) pull reinforcement, the single or double strands of galvanized iron wire in the goods and vehicles between the two tie nodes reciprocating around, and should be pulled tight galvanized iron wire so that the tightness of each strand as far as possible common, the rest of some cross around their rope rod, the use of the wring rod wring, the tail toward the car.
(2) Hot wire plating precautions: (1) shall not damage galvanized iron wire when wringing tightly. ② Stop using more than two strands of galvanized iron wire one-time surround the operation method. (3) The diameter of galvanized iron wire for pulling shall not be 4mm small, and the diameter of galvanized iron wire for binding shall not be less than 2.6mm. (4) Galvanized iron wire shall not be used as waist hoop pressure reinforcement, usually not used as a whole binding.
Warehouse galvanized wire is mainly used to block and distinguish regional function, warehouse galvanized wire is one of the first use of galvanized wire, warehouse galvanized wire is the first layout features are as follows: Column + net frame, column to choose square steel pipe for the most, galvanized wire frame is also small square tube as the data, column and net frame corresponding to the position are welded connecting lug (flat iron), column and net frame through the connecting lug bolt fixed, the bottom of the column welding bottom plate, column bottom plate through the expansion bolt and fixed on the ground.
Post time: 11-10-21