First, the concept is different
Hot dip galvanizing is an effective metal preservative, mainly used in various industries of metal structure facilities. The steel parts after rust removal are immersed in the molten zinc solution at about 500℃, so that the surface of the steel member is attached with zinc layer, so as to play the purpose of anticorrosion. Hot dip zinc is to immerse the steel member after rust removal into the molten zinc liquid at about 600℃, so that the surface of the steel member is attached with zinc layer. The thickness of the zinc layer is not less than 65μm for the thin plate below 5mm, and not less than 86μm for the thick plate above 5mm. So as to play the purpose of corrosion prevention.
Two, the production process is different
Galvanizing refers to the surface treatment technology of plating a layer of zinc on the surface of metal, alloy or other materials to play the role of aesthetics and rust prevention. The main method used now is hot galvanizing. However, hot dip galvanizing industry has been developed with the rapid development of cold strip rolling in the past 30 years. The production process of hot-galvanized sheet mainly includes: raw plate preparation → pre-plating treatment → hot-dip plating → post-plating treatment → finished product inspection and so on.
According to the habit often according to the basic galvanized hardware before plating treatment method, as long as it does not contact with water can keep 5~7 years or so without rust, of course, if it is a salt water test, it will not be over 4 hours. Hot dip zinc is to use zinc tin solution to cover the hardware, and the rust prevention time is about five times that of traditional galvanizing. The general outdoor construction is to use hot dip zinc, and the salt water test can do about 36 hours.
At present, it is recognized that the best surface treatment method for rust prevention is to make dacron rust. Generally, auto parts have been used this method for rust prevention. The salt water test generally lasts more than 96 hours. But if the hardware is used in very poor conditions, there are also people who use “asphalt” which is tar to do the surface treatment.
Three, the use of different technologies
Hot dip galvanizing is the plating of zinc layer on the surface of Angle steel, channel steel and other metals to achieve the appearance of convenience and rust prevention of metal. Hot-dip zinc processing plants use zinc tin solution to prevent corrosion on the workpiece. This new technology can extend the corrosion time by up to five times, which is usually used in outdoor construction. Because the principle of action is not the same, so the role of the workpiece is not the same. The appearance of hot dip zinc plant is only to expand the scope of action.
Post time: 18-11-22