Rapid Delivery for Thick Stainless Steel Wire Mesh - Expanded Metal Mesh – Shengsong

Expanded Mesh

Standard Expanded Metals: Expanded metal as it comes off the machine. The strands and bonds are set at a uniform angle to the plane of the sheet. This adds strength and rigidity, allows air circulation, distributes the load on the metal to the supporting frames as well as making a skid resistant surface.  Standard expanded metal is abbreviated XM.

Flattened Expanded Metal: Manufactured by perforating the standard expanded sheet through a cold roll reducing mill parallel to the LWD. By flattening the sheet, the bonds and strands are turned down to produce a smooth and flat surface, reducing the overall thickness and elongating the diamond pattern (LWD).  Cross roll flattening is done by passing the expanded metal sheet through a cold roll reducing mill parallel to the SWD. The result is the same except the diamond pattern SWD is elongated.  Flattened expanded metal is abbreviated FXM.

Grating: Grating is a standard expanded metal pattern produced from heavier gauge low carbon steel plates. The strands and openings are considerably larger than the other meshes. Ideal for use whenever a strong durable and lightweight surface is required. Although used primarily for pedestrian traffic, grating can accommodate heavier loads when properly supported.

Decorative Patterns: Specially designed expanded metal for use in architectural and decorative applications.  These designs can be used to provide privacy and to control light and air while allowing visibility.  Sun screens, room dividers, and building facades are only a few of the possible design possibilities. Decorative expanded metal is available in carbon steel, aluminum and other alloys in a wide range of patterns and gauges. Most of these patterns are produced on a special order basis only.

Aluminum Expanded Mesh, Carbon Steel Expanded Mesh, Stainless Steel Expanded Mesh

Expand metal mesh has a wide Application:

Fencing for the garden, back yard, residential and industrial facilities,
Floor treads, stairs, transport vehicles, construction machinery, cranes, mining, etc.,
Expand metal for the seat belts and other rotating parts,
Screening for the milling, bakery and food industry,
Production in the electrical industry protective mesh, batteries, grounding plates, which include heating protection, masks, electric water heaters,
In radio and television industry, including speaker and microphone,
In light industry for the protection of instruments, all kinds of support, in the cloakroom on the shelves, billboards, trash, towels, etc.,
For the boxes and pallets used for the transport of goods,
In the automotive industry for automotive furnace, tractors and filter,
In the construction industry, steel, walls and roofs, reinforced on the asphalt road, factory floor, and so on.

Expanded mesh also used in automotive:
Air filters, oil filters, and exhaust muffler, front grille and exterior parts, etc.

Insulation panels, thermal insulation panels, acoustical panel for construction, sound insulation panels for vehicles, marine soundproof panels, and exterior building.

Sorter (screening):
Agricultural seeds and grain, coal, sand, gravel mining, chemicals for drug equalization studies, etc.

Housing-related:
Back home boiler exhaust, kitchen, plants, plant, dust box, etc.

Other:
Food, chemical, pharmaceutical, paper, mining, ceramics, etc.