It is necessary to calculate the amount of thorn rope used in the enclosure, so that the amount of thorn rope purchased can be reasonably planned to facilitate construction. The common thorn rope produced by the manufacturer is the 14*14 type of thorn rope product, because the wire diameter of the wire and the thorn rope are the same, so it is better to calculate the length and weight. Usually each kilogram of barbed rope can reach a useful length of about 10 meters. The length of each kilogram of raw material is about 35 meters. Both 35 m length of raw wire diameter can produce 10 lengths of barbed wire cost.
During the calculation process, the 12*14 specifications of the barbed rope can not be calculated according to the above calculation formula, because the first is the use of two specifications of raw materials, the finer the diameter of the wire then the higher the processing cost. Generally speaking, a kilogram of 12*14 thorn rope can reach about 7.5 meters, and the ratio of warp and thorn rope can not be calculated according to the traditional 7 to 3. The specific number of nemator and warp filaments needs to be calculated through a series of professional measurements and increase the loss of raw materials and other factors. Thorn rope factory will also carry out reasonable calculation according to customer needs to facilitate customer use.
Post time: 10-08-23