How to properly maintain and clean hot-dip galvanized wire products?

Hot-dip galvanized wire products are a common metal products, widely used in construction, agriculture, gardens and home and other fields. Proper maintenance and cleaning of hot-dip galvanized wire products can extend their service life and improve their appearance and performance. The following describes how to properly maintain and clean hot-dip galvanized wire products.
1. Maintain the environment of hot-dip galvanized wire products. Hot-dip galvanized wire products are susceptible to corrosion by water, acid, alkali and other chemicals, so it is necessary to avoid long-term exposure to wet, acid-base environment, and try to keep its dry and ventilated environment. In use, it is necessary to regularly check whether the hot-dip galvanized wire products are damaged, deformed, etc., and timely maintenance or replacement.

2. Clean the surface of hot-dip galvanized wire products. The surface of hot-dip galvanized wire products is easy to collect dust and oil stains, affecting its appearance and performance. Soft brush, wet cloth or detergent can be used to clean the surface, pay attention to avoid the use of detergent containing acid and alkali components, so as not to corrode the hot dip galvanized layer. Cleaning should be done gently to avoid scratches or damage.
3. Deal with corrosion of hot-dip galvanized wire products. If there is rust on the surface of the hot-dip galvanized wire product, you can use sandpaper, wire brush and other tools to erase the rust, and clean it with alcohol or detergent, and then treat it with paint. For large-scale corrosion of hot-dip galvanized wire products, it is recommended to seek relevant repair personnel or replace new products.
4. Prevent the hot dip galvanizing layer from spalling. During the use of hot-dip galvanized wire products, if the hot-dip galvanized layer is spalling, it should be repaired or replaced in time to prevent further corrosion and damage. When installing hot-dip galvanized wire products, it is necessary to minimize operations such as hammering and friction that may cause damage to the hot-dip galvanized layer.
5. Use proper lubricant. Hot-dip galvanized wire products will produce wear and friction during movement and friction, and appropriate lubricants can be used to reduce friction and wear and extend service life. When using lubricants, it is necessary to choose lubricants that are harmless to hot-dip galvanized wire products and will not destroy the hot-dip galvanized layer.