What is the supporting role for the hook wire mesh manufacturers? If the material proportion is larger or the mesh number is higher, the mesh number should be increased under the gilled net, the purpose is to play a supporting role, reduce the pressure of the material on the screening net, and extend its service life.
2. After the mesh frame is assembled into the screen box as required, remember to extend the long crimped mesh into the corresponding discharge port to avoid mixing here.
3. When installing, be sure to tighten the crimped net, because the tension of the crimped net is an important factor affecting the screening efficiency.
4, when installing the pressure plate, be sure to pay attention to its flatness, and lined with a flexible sponge sealing belt evenly locked, because this is not only the key to eliminate the occurrence of mixing, but also an important factor affecting the service life of the crimped net.
5, pay attention to be sure to choose a rougher wire mesh, because the installation of the linear screen mesh is relatively complicated.
6, when cutting, the width of the ginning net and the mesh can be consistent, the length must be longer than the mesh 50~70mm.
7, when installing the clean net pinball, we must pay attention to the screening difficulty and mesh number of materials, and can not blindly install.
Post time: 09-01-24