1, galvanized wire mesh molding sheet must be packed with flat hard materials to avoid eternal deformation due to poor packaging. It is very important that each package and roll of raw material be marked with product name, standard, quantity, trademark, lot number, manufacturer, date of production, packing symbol, inspector code and inspection certificate.
2, galvanized wire mesh molding sheet storage ground should be flat, according to the symbolic needs of regular accumulation, height should not exceed 2M, and away from heat sources, to avoid exposure.
3, galvanized wire mesh binder transport, storage and use should be adopted in accordance with the relevant provisions of safety, fire prevention measures, so as to be safer to use.
The surface of the alluvial before hot dip galvanizing of the iron wire can be partially removed from the surface of the film layer, surface impurities and other shortcomings can be found and solved according to the basic technology; Excessive foam is caused by soap and soapable surface active substances such as human fat brought into the tank. A moderate rate of foam production would be harmless. The presence of many fine homogeneous particles in the tank can stabilize the foam layer and use activated carbon mat to remove surface active substances. Or make the bubble unstable according to excessive concern, which are all reasonable countermeasures; Other measures should also be adopted to reduce the amount of surfactant brought in. The introduction of organic matter can dramatically reduce the speed of electroplating process. Although the secret recipe of organic chemistry is beneficial to the high accumulation rate, the thickness of the coating cannot meet the requirements after the organic matter is brought on, so activated carbon can be used to solve the tank.
Post time: 16-10-23