Galvanized wire specifications, the galvanized wire produced by our factory can range from 8 to 22, which refers to the BWG standard, that is, from about 4mm to 0.7mm, which can basically cover the model required by customers. As for the raw materials of galvanized wire, under normal circumstances, we use Q195 mild steel, and some factories will also use SAE1006 or SAE1008 materials. The following is the zinc coating, for galvanized wire, this thing is more important, the general zinc coating is about 50g/m2 to 80g/m2, some customers need high zinc galvanized wire, zinc coating can reach 200g/m2 to 360g/m2. The tensile strength of galvanized wire is usually 350n/m2 to 800n/m2. Followed by the packaging specifications of galvanized wire, small rolls of galvanized wire specifications are 50kg/ roll, 100kg/ roll, 200kg/ roll. Of course, there are large rolls of galvanized wire, the weight can reach 300kg/ roll or 800kg/ roll.
Galvanized iron wire is widely used in construction, handicrafts, wire mesh, highway guardrail, product packaging and daily civilian and other fields.
The uniformity of galvanized wire is reflected in what aspects:
Galvanized wire should be galvanized evenly, one is now its cross section, the second is the longitudinal uniformity. In the actual operation process, such as the shaking of the steel wire, the surface scum in the plating pot and other reasons will cause the accumulation of the galvanized layer on the surface of the galvanized wire, and efforts should be made to solve the problem.
In addition to these reasons, we should also pay attention to the tooling and process must be stable, and regular testing should be done to ensure the uniformity of the galvanized layer.
Post time: 13-12-23