In fact, we pay attention to galvanized welding mesh when you can find it after some surface treatment, these surface treatment is very important. Different processing will make it in use when the performance of some changes, so we hope that in the usual use of the process can be strictly in accordance with the requirements of it to process.
Plastic spray galvanized welding net is also we often talk about electrostatic powder spraying, it is the use of electrostatic generator to make plastic powder charged, adsorption on the surface of galvanized welding net, and then after 180 ~ 220℃ baking, the powder melting adhesion on the metal surface, spray powder is mainly acrylic powder, polyester powder, etc.
The sprayed workpiece is pushed into the curing furnace, heated to a predetermined temperature (generally 185 degrees), and the corresponding time of insulation (15 minutes); Open the furnace to take out cooling is galvanized welded mesh products. Impregnation is the process of coating the metal surface by heating the impregnation powder to achieve anti-corrosion. It is called impregnation. Spraying and dipping compared with dipping process products on the plastic powder amount is high, plastic powder adhesion is uniform, anti-corrosion and anti-aging time is long, but the cost is higher than the spray; Choose spray galvanized welded wire mesh or dip galvanized welded wire mesh depends on the customer’s product requirements.
Translation software, if there is any error please forgive.
Post time: 22-06-21