Generally speaking, there are three kinds of anticorrosion and rust prevention techniques of hook mesh: surface immersion, spray and surface galvanization. These three methods are to strengthen their ability to prevent corrosion and resist natural risks, and extend their service life. Today we are going to talk about the difference between dip plastic hook and galvanized hook.
The disposal characteristics of the dip hook network and the wind, dip is also used to compare a common one, the color of the surface disposal is simple, generally dark green, however, if you want to change to other colors, dip will be more convenient. Because its inner line or inner pipe is ordinary iron wire, so, after a period of time, the inner line or inner pipe will slowly corrodes outwards, and the glue outside fades away, and the hook net will die.
The disposal characteristics and advantages of galvanized hook flower net, galvanized two disposal methods: cold plating and hot plating, corrosion prevention and rust prevention than dipping treatment is much better, so the service life is much longer than dipping hook flower net. Full cover galvanized can also control the consumption cost, stop a large range of galvanized.
Cold plating is a physical treatment method. Zinc is simple and uneven, and the amount of zinc is less than that of hot plating for chemical treatment in corrosion and rust prevention. The amount of zinc on the hot plating is thicker, the surface of the treatment is evenly flat, and it is not easy to fall off. A layer of alloy composed of zinc and metal has a very strong oxidation ability, and there is a layer of pure zinc on the outside of the alloy, which is why the hot plating is thicker and stronger than the cold plating. In the natural recovery of high conditions, galvanized hook net can play a very good maintenance effect on the environment, it is not afraid of the wind and rain, is the battle machine in the hook net, muc
Post time: 04-08-21