Barbed rope guardrail net installation

The barbed rope lead is twisted and braided by the fully automatic barbed rope machine. Folk commonly known as iron tribulus. Product type: single screw and double screw. Raw material: high quality low carbon steel wire (electrogalvanizing, hot galvanizing, plastic coating, plastic spraying) wire, blue, green, yellow and other colors. Application: used for separation and protection of grassland boundary, railway and expressway.

barbed rope lead

Barbed wire fence net
Twist the barbed rope back and forth
Barbed wire diameter: 2mm
Thorn length: 16 mm
Spiny spacing: 100mm
Column size (mm) : 48×1.2×2200 (different pipe type and thickness can be selected according to customer requirements)
Column before plastic: 0.8mm(customizable)
Column spacing (mm) : 3000
Embedded column (mm) : 300
Embedded foundation (mm) : 400 x 400 x 500
Surface treatment: Impregnated green (dark green/white/blue optional); There are other surface treatment options: cold galvanized, hot galvanized, hot galvanized after dipping.
Installation steps:
1. When installing barbed rope guardrail network, first determine the pipeline situation below the roadbed, determine the hardness of the soil layer, and then decide whether to use cement hardened foundation or flange type base (with expansion screws and the ground connection).
2. After the column is installed, hang the barbed rope on the column hook on site.
3. After installation, cover the rainproof cap on the column.


Post time: 18-02-22